Audison BIT TEN

�� .
�� .

Quick Overview

� bit Ten �� , �� OEM � �� .

249,00�

�� :

��:

�� : 3-5 ��

��

New Page 1

To Bit Ten �� AFTER MARKET �� . � �� .

bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.

Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.

USS � Universal Speakers Simulator
Thanks to the integration of the USS technology, the bit Nove can also be connected to headunits featuring the �speaker load detection� circuit that would otherwise mute the audio signal output.

During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.The user can configure the output mode of each channel relative to the installed system.

bit One HD �� Hi-Res �� . � bit One HD �� Audison Full DA HD, �� : �� (TOSLINK �� 24 bit / 192 kHz) �� DSP �� 24 bit / 96 kHz �� Audison �� AD, �� Hi-Res.
�

�

Specification

��	��
��	0.6 kg
�� (� x � x �)	191 x 131 x 34 mm

Tech Sheet

�

��

it DSP comparison table		bit One HD Virtuoso	bit One	bit Nove	bit Ten
Audio Inputs	Analog inputs (high levels / pre in)	12 high lev. + 6 pre in	8 high lev. + 6 pre in	6 high lev. + 6 pre in	4 high lev. + 4 pre in
	Analog low-level stereo auxiliary input	1	2	1	1
	USS technology
	Optical digital input	2	1	2
	Electric coaxial digital input		1
	High-level momentary audio interrupt input with system turn on capability (with Phone Mute IN) for use with mobile phone or navigation systems		1		1
Audio Outputs	Independent analog PRE channels featuring adjustable level	13 IIR � 9 FIR	8	9	5
Audio Outputs	Independent digital audio channels through AD Link output (CAT5 STP LAN cable for use with AD Link provided amplifiers)	13 IIR � 9 FIR	8
Input/Output Controls	USB /B (2.0 / micro USB 2.0 only for bit One HD) connector for PC connection
	AC Link control bus connectors for DRC / DRC MP / DRC AB and provided amplifiers
	Remote In/Key mem
	Remote out with fixed delay or adjustable by PC	adj.	fixed	adj.	adj.
	Mute In and Phone Mute controls settable by PC to switch the audio inputs to auxiliary inputs with turn on capability
System Configuration	Full range stereo signal derived through automatic summing high level input channels
	Auto tune with Audison bit Tune
	Guided procedure that, thanks to a wide range of set names, provides the ability to assign each speakers channel to the bit processor connections and automatically coordinate their functioning
In/Out Volume	Reference tone/signal for sensitivity adjusting	CD-DVD	CD-DVD	CD	CD
	Main input sensitivity adjustement	automatic with PC	automatic with PC	manual	manual
	Independent level control for each output channel for system fine tuning	-40 ÷ 0 dB	-40 ÷ 0 dB	-40 ÷ 0 dB	-40 ÷ 0 dB
Equalizer	Dynamic equalizer: self-adjusting gain between low and high listening levels
	Bass Boost	Adjustable parametric pole (�12 dB; 10 ÷ 500 Hz)		Adjustable parametric pole (�12 dB; 10 ÷ 500 Hz)
	Automatic de-equalization (with supplied Test CD *- DVD � Audio files)	with �time delay compensation�
	Equalizers for each auxiliary inputs	Parametrics Equalizer: +12 dB ÷ -15 dB; 10	31 band (1/3 oct; +/-12dB)
	Independent equalizers for each output channels	N.13 Parametrics Equalizers: +12 dB ÷ -15 dB; 13 poles	31 band (1/3 oct; +/-12dB)	N.9 Parametrics Equalizers: �12 dB;10 pole;	31 band (1/3 oct; +/-12dB)
	MAIN EQ	N.13 Parametrics Equalizers: +12 dB ÷ -15 dB; 9 poles FIR type +3 poles IIR type
Crossover Filter	Filter typology: Hi-pass, Lo-pass, Full Range, Band-pass
	Cut-off frequency steps	70 (10 Hz to 20 kHz) + direct numeric frequency input	70 (10 Hz to 20 kHz)	68 (20 Hz to 20 kHz)	68 (20 Hz to 20 kHz)
	Filter mode and Cut-off slope	FIR / Linkwitz -Butterworth -Bessel 6 to 48 dB/Oct.	Linkwitz -Butterworth 6 to 48 dB/Oct.	Linkwitz -Butterworth 6 to 24 dB/Oct.	Linkwitz -Butterworth 6 to 24 dB/Oct.
	Bandpass filter with asymmetrical slope setting
	Alignments
	Mute: Selectable for each output (On/Off)
	Phase: Selectable for each output (0�/180�)
Time Alignment	Guided procedure for the speaker distance data entry with an automated calculation of proper delay times for each channel for accurate time alignment set-up
Time Alignment	Delay	0 ÷ 22 ms	0 ÷ 22 ms	0 ÷ 15 ms	0 ÷ 15 ms
DRC / DRC MP / DRC AB	Digital Remote Control (DRC/DRC MP/ DRC AB) supplied with product	(DRC MP)	(DRC)	Optional (DRC AB)	Optional (DRC/DRC MP)
	Master Volume control, Subwoofer Volume control, Balance control, Fader control; Input selection; memory selection
	Bass Boost control
	Dynamic Equalizer On/Off
Memory	Available presets separately managed and recalled by the DRC/DRC MP/DRC AB Remote Control	8 (DRC MP)	4	4	2
bit software	Microsoft Windows (XP, Vista, 7, 8, 10) based software with �Standard� and �Expert� operating modes; minimum screen resolution: 1024 x 600 px